How To Repair The Forward Reverse In My Black & Decker Cordless Drill

Electrical Drill: No Reverse

If your electric drill has no reverse, bank check the switch and actuator. Read on for repair advice and tips for how to fix your tool on your ain. It might really be a simple set up, and we can walk you through the process. Refer to your owner's manual for detailed instructions for your model.

Switches

The switch controls the electrical current to the motor and, on some models, the speed and direction. If the switch starts to function randomly when you push it, has no opposite, fume from the switch or the speed control on the switch is non always working/merely on certain speeds, and so replace the switch as these are indicators the switch is failing. To replace a switch, open the two halves of the drill example. Remove any hold down screws on the switch. Disconnect the electrical connectors. Remove the quondam switch and install the new 1. Attach the electrical connectors to the advisable connections. Install the hold downwardly screws and reassemble the case.

The switch controls the electrical current to the motor and, on some models, the speed and direction. If the switch starts to office randomly when you button information technology, has no contrary, fume from the switch or the speed control on the switch is non always working/only on certain speeds, so replace the switch as these are indicators the switch is failing. To supervene upon a switch, open the 2 halves of the drill case. Remove any concur down screws on the switch. Disconnect the electrical connectors. Remove the old switch and install the new one. Adhere the electrical connectors to the advisable connections. Install the agree down screws and reassemble the case.

Actuators

On models with the separate forward/opposite switch, if yous have no reverse, then you will need to supercede this switch. Open the drill case and locate the frontwards/reverse switch, which is unremarkably office of the power switch/trigger. If the plastic switch is broken, you can just supplant it by lifting up the power switch and pulling the frontward/opposite switch out of the power switch. And so, insert the new switch on the tab on the ability switch. Button the ability switch dorsum down, into the instance, and reinstall the 2 halves of the example.

On models with the carve up frontward/reverse switch, if you have no reverse, so you volition need to replace this switch. Open the drill case and locate the frontwards/opposite switch, which is unremarkably part of the ability switch/trigger. If the plastic switch is broken, you lot tin can just replace it by lifting up the ability switch and pulling the frontwards/reverse switch out of the power switch. Then, insert the new switch on the tab on the ability switch. Push the power switch back down, into the case, and reinstall the two halves of the instance.